MASTER 18kg/ Finishing coat ready to use

PRODUCT ADVANTAGES
Finish ready to use
putty MASter Mas is
breathable coating and
permeable created on
based on finely minerals
ground. It keeps
performance properties for 12
months from the date of production,
despite closing and opening the package. It is plastic and perfectly white after drying, so it is enough to cover it with paint once.
RECOMMENDATIONS
We recommend priming absorbent, calcareous, gypsum, concrete and aerated concrete substrates before applying MASter Mas with a primer recommended for such substrates in order to stop absorption and extract liquids from MASter Mas. Apply the putty to dry, strongly bonded substrates, cleaned of old paint coats and loose parts not related to the old substrate. After application, drying, sanding and smoothing, wipe dry, remove dust before applying the paint. We recommend priming the smoothed MASter Mas surface with MASter – Grunt in order to strengthen, harden, immunize and extend the durability.
EFFICIENCY
For cement-lime plaster – 1 kg / 1 m2 For gypsum plaster – 1 kg / 1.5 m2
Plasterboards – 1 kg / 2 m2
HOW TO USE
Smooth in the form of a paste, after light stirring in the package, apply using stainless steel tools (trowel, putty). A single layer should be 1 – 2 mm. Larger defects and unevenness should be covered with successive layers after the previously applied layer is dry. Filling should be performed at a temperature above 5 ° C and a maximum air humidity of 70%. It is completely hardened after 12 hours. Sand with mesh or fine sandpaper. You can paint with various types of decorative paints. Tools should be washed with water immediately after use, do not allow the product to dry on the tools used.
2/3
OVERLAPPING
The finish can be applied with stainless steel tools as well as with a hydrodynamic unit.
TECHNICAL DATA
Density – 1.85 g / cm3 ± 5% Grain size – 100 μm MAX Filler – dolomite
Sanding – sandpaper 150 – 220